Single Head Cutting Machine for Aluminium and UPVC
The MEPCCSH1 is a single-head aluminium and uPVC profile cutting machine built for precision miter cuts at both 45° and 90° angles. Whether you need a 90-degree cutting machine for straight cuts or a 45-degree aluminium cutter for perfect corner joints, this machine delivers both in one compact unit — making it the ideal uPVC single head cutting machine for fabrication workshops.
Equipped with an integrated pneumatic clamping system, it holds aluminium window profiles and uPVC channel profiles firmly in place, eliminating vibrations for a burr-free finish. The rapid-adjustment mechanism makes switching between angles fast, boosting throughput in high-volume uPVC cutting machine setups.
Compatible with all standard aluminium and uPVC profiles, it runs on compressed air only — no electrical motor needed for the clamping mechanism. Widely used across India as a reliable uPVC profile cutting machine and aluminium window cutting machine for doors, windows, and facade fabrication.
Key Features
Applications
Where This Machine Excels
Aluminium Window Fabrication
- Sliding window frames
- Casement window profiles
- Door frame sections
- Curtain wall mullions
uPVC Profile Processing
- uPVC window sashes
- uPVC door frames
- Tilt & turn profiles
- Multi-chamber profiles
Industrial Applications
- Architectural aluminium sections
- Solar panel frames
- Partition system profiles
- Facade cladding channels
Key Industries Served
- Construction & real estate
- Interior design firms
- Glass & glazing companies
- Aluminium fabrication workshops
Compare
Variants Available
| Blade Size | 12" | 14" | 16" | 18" |
|---|---|---|---|---|
| Power | 3 HP | 3 HP | 5 HP | 5 HP |
| Warranty | 6 Months | 6 Months | 6 Months | 6 Months |
| Motor | Rotomotive/CG | Rotomotive/CG | Rotomotive/CG | Rotomotive/CG |
Specifications
Technical Specifications
Reviews
What Our Customers Say
"We do commercial glazing work in Bangalore and needed a reliable cutting machine. Went with Mechnovate 45/90 degree cutter after comparing 3-4 brands. Cutting accuracy is good, blade lasts long. One thing I will say — the user manual could be better, we had to call their support to understand the fence adjustment. But the machine itself is solid. Using it daily for 6 months now."
"Got the cutting machine delivered in just 1 day since we are in Surat and their factory is Ahmedabad. Machine works well, cuts are clean on both angles. We mainly use it for aluminium sections. The clamp could be slightly better designed for very thin profiles — sometimes needs extra care. But for the price point, no complaints. Their engineer did a good setup demo."
"Bought complete setup from Mechnovate — cutting machine, punching machine, copy router. They gave us package pricing which was reasonable. All 3 machines came together and their team installed everything in 2 days. Been running for about 3 months now. Cutting machine is excellent. Punching machine is good. Copy router takes a bit of skill to operate but our guys got hang of it after a week. Would recommend for anyone starting fresh."
"We have the 45/90 cutting machine. Being in Ahmedabad we went to their factory and saw the machine running before buying. Cutting is precise, blade lasts a long time. One small thing — the measuring scale on the fence is in mm only, would have been nice to have inches also for some of our clients who give measurements in inches. Small thing but worth mentioning. Machine overall is excellent quality."
"Cutting machine reached Coimbatore in 4 days. Machine is good, cuts are clean on both 45 and 90 degree. We work with aluminium and uPVC both — works well on both materials with different blades. The motor is powerful enough for thick aluminium sections. One feedback — the dust collection could be better designed, we end up with aluminium chips around the machine. But cutting quality itself is top notch."
"We manufacture custom windows in Bhopal and rely on the Mechnovate cutting machine for all our profile cutting. Accuracy has been consistent — mitre joints fit well without requiring extra filing. The machine handles the daily workload of 50-60 cuts without any performance drop. We also bought TCT blades from them which are genuine quality. Happy with the overall experience. Would recommend to fabricators in MP region."
FAQ
Frequently Asked Questions
Common questions about the Single Head Cutting Machine for Aluminium and UPVC.
Pricing Info
Single Head Cutting Machine for Aluminium and UPVC Price & Availability
Starting at ₹ 1,40,000 | August 2026
Place Your Order
Buy Single Head Cutting Machine for Aluminium and UPVC
Submit your order enquiry — our team calls you within 2 hours to confirm
Explore More
Related Cutting Machines
2 Station Pneumatic Aluminium Punching Machine
Model: MEPPPST2
View Details →
1 Station Pneumatic Aluminium Punching Machine
Model: MEPPPST1
View Details →
Pneumatic Copy Router Machine for Aluminium and UPVC
Model: MEPCR Series
View Details →
Manual Copy Router Machine for Aluminium and UPVC
Model: MEMCR Series
View Details →About Single Head Cutting Machine for Aluminium and UPVC
The Mechnovate 45/90 Degree Cutting Machine (Model: MEPCCSH1) is our most popular aluminium and uPVC profile cutting solution. Designed for rapid switching between 45-degree mitre cuts and 90-degree straight cuts, this machine is the backbone of thousands of window fabrication workshops across India. It delivers clean, burr-free cuts on aluminium extrusions up to 3mm wall thickness and all standard uPVC multi-chamber profiles.
The MEPCCSH1 combines a rigid cast-iron body with a pneumatic saw feed mechanism to deliver consistent cut quality shift after shift. The angle changeover system uses precision-machined stops — the operator releases a locking lever, swings the saw assembly to the desired angle, and locks it in place in under 5 seconds.
The pneumatic clamping system uses a wide-jaw design that contacts the profile over a large surface area, preventing marking on soft aluminium and delicate uPVC profiles.
Key Features — Single Head Cutting Machine for Aluminium and UPVC
Rapid Angle Changeover
Switch between 45 and 90 degrees in under 5 seconds using the quick-lock lever mechanism. Precision-machined angle stops ensure repeatable accuracy without the need for angle measurement.
Cast-Iron Construction
The machine body is cast from high-grade grey iron with machined mounting surfaces. Cast iron absorbs vibration better than fabricated steel, delivering smoother cuts and longer blade life.
Wide-Jaw Clamping
Pneumatic clamps with 80mm-wide jaws distribute clamping force evenly across the profile. This prevents profile distortion and eliminates the clamping marks that narrow-jaw systems leave on soft aluminium.
Integrated Chip Collection
A built-in chip tray with a removable drawer captures 90% of cutting chips at the source. The work area stays clean and safe without a separate chip extraction system.
How It Works — Working Principle
The operator positions the profile against the rear fence and side stop, selects the cutting angle (45 or 90 degrees), and activates the pneumatic clamp. The saw assembly descends through the profile in a controlled arc powered by a pneumatic cylinder.
The cutting speed is adjustable via a flow control valve, allowing the operator to slow the feed for thick aluminium sections or speed it up for thin uPVC profiles. After the cut, the saw retracts automatically and the clamp releases.
Ideal For
- ✓Entry-level window fabrication workshops
- ✓Small to mid-sized fabricators doing 5-30 windows per day
- ✓Workshops needing a versatile dual-angle cutting machine
- ✓Fabricators working with Domal, Jindal, and European aluminium systems
- ✓Mobile fabrication setups where space and weight matter
Maintenance Tips — MEPCCSH1
- ●Apply a drop of pneumatic oil to the saw arm pivot bearing daily. A dry bearing causes jerky saw movement and rough cut surfaces.
- ●Check the angle stop faces for aluminium chip deposits weekly. Even a thin layer of chips shifts the cutting angle by 0.5-1 degree.
- ●Adjust the pneumatic flow control valve seasonally — colder temperatures increase air viscosity, requiring a slightly more open setting for the same cutting speed.
- ●Inspect the rear fence for straightness monthly using a precision straightedge. A bent fence causes the profile to sit at a slight angle, producing cuts that are off-square.
Why Choose Mechnovate Single Head Cutting Machine for Aluminium and UPVC?
- ✓Precision-engineered cutting machine for aluminium and uPVC window profiles — handles all standard Indian profile systems including Domal, Jindalinium, and European systems.
- ✓Manufactured in Ahmedabad, Gujarat with rigorous quality standards. Every machine is tested before dispatch with actual aluminium and uPVC profiles to ensure cut quality and dimensional accuracy.
- ✓Factory-direct pricing with no distributor markup. GST invoice provided. Same price for buyers across India — whether in Delhi, Mumbai, Bangalore, Chennai, or any other city.
- ✓24/7 after-sales support via WhatsApp and phone. Spare parts stocked in Ahmedabad and dispatched same-day. On-site warranty repairs by Mechnovate technicians.
- ✓1-year comprehensive warranty covering parts and labour. On-site installation and operator training available on request.
Applications of Single Head Cutting Machine for Aluminium and UPVC
🏢 Aluminium Window Fabrication
- ●Sliding window frames
- ●Casement window profiles
- ●Door frame sections
- ●Curtain wall mullions
🏭 uPVC Profile Processing
- ●uPVC window sashes
- ●uPVC door frames
- ●Tilt & turn profiles
- ●Multi-chamber profiles
🔧 Industrial Applications
- ●Architectural aluminium sections
- ●Solar panel frames
- ●Partition system profiles
- ●Facade cladding channels
🎯 Key Industries Served
- ●Construction & real estate
- ●Interior design firms
- ●Glass & glazing companies
- ●Aluminium fabrication workshops
Technical Specifications — MEPCCSH1
| Parameter | Value |
|---|---|
| Model | MEPCCSH1 |
| Blade Size | 305 mm TCT (standard) |
| Clamping Type | Pneumatic |
| Cutting Angles | 45° and 90° |
| Machine Weight | 150 kg |
| Power Required | Compressed Air Only |
| Profile Thickness | Up to 3 mm |
| Operating Pressure | 6–8 bar |
| Profile Compatibility | Aluminium & uPVC |
| Machine Size (L × W × H) | 800 × 800 × 1100 mm |
Frequently Asked Questions — Single Head Cutting Machine for Aluminium and UPVC
What makes this different from other 45/90 cutting machines?
The MEPCCSH1 uses a cast-iron body instead of fabricated steel, which absorbs vibration better for smoother cuts. The wide-jaw pneumatic clamping prevents the profile marking that is common with cheaper narrow-jaw machines. Every machine is test-cut with actual aluminium and uPVC profiles before shipping.
What blade size does this machine use?
The machine uses a 350mm TCT saw blade with a 30mm arbor bore. We supply premium Italian-made TCT blades optimized for aluminium cutting, and replacement blades are available with same-day dispatch from Ahmedabad.
Can I cut profiles at angles other than 45 and 90 degrees?
The standard machine has preset stops at 45 and 90 degrees. Custom angle stops can be installed for special applications — contact our engineering team with your requirements.
Buying Guide — Cutting Machine
When choosing a cutting machine for your aluminium and uPVC window fabrication workshop, consider your daily production volume, the profile systems you work with, and the specific operations you need to perform. Mechnovate manufactures machines for workshops of all sizes — from small fabricators doing 5–10 windows per day to large production facilities processing 100+ windows daily.
Every Single Head Cutting Machine for Aluminium and UPVC shipped from our Ahmedabad factory includes a 1-year comprehensive warranty covering parts and labour. On-site installation by a trained Mechnovate technician and operator training are available on request. Spare parts and consumables are stocked in Ahmedabad and dispatched same-day to any location in India.
Need help choosing the right cutting machine?
Call +91-9265699061 or email [email protected] for a custom quote based on your workshop requirements.