1 Station Pneumatic Aluminium Punching Machine
The 1 Station Pneumatic Punching Machine (Model: MEPPPST1) is designed for precision hole punching on aluminium window and door profiles. Features an "Easy Guiding System" that ensures profiles are accurately positioned every time, eliminating misaligned holes. The adjustable cutting depth meets specific fabrication requirements for different hardware types and profile thicknesses. This single-station model can be configured for single-tool setups based on your production needs, with die customization available for specific profile systems. The pneumatic operation delivers consistent punching force of 1.85 tons through a single cylinder, sufficient for clean holes in aluminium profiles up to 2.5mm wall thickness. The machine operates on compressed air only — no electrical connection needed for the punching mechanism. The compact 400mm x 400mm footprint fits into tight workshop layouts, and at 150 kg the machine is stable enough for continuous production without bolting to the floor.
Key Features
Applications
Where This Machine Excels
Window Hardware Holes
- Handle mounting holes
- Lock mechanism cutouts
- Hinge pocket punching
- Drainage slot punching
Profile Processing
- Aluminium profile punching
- uPVC profile notching
- Multi-point lock holes
- Espagnolette mounting holes
Industrial Applications
- Sheet metal punching
- Custom die-cut patterns
- Ventilation slot punching
- Cable tray perforations
Key Industries Served
- Window & door manufacturers
- Aluminium fabrication units
- Sheet metal workshops
- HVAC duct fabricators
Specifications
Technical Specifications
Reviews
What Our Customers Say
"Machine is working fine. We bought single station punching machine. For our small workshop this is enough. Die change takes some time but that is expected in single station. Mechnovate team helped us on WhatsApp when we had doubt about die alignment. Delivery to Kerala took 5 days which was slightly more than expected but packaging was proper, no damage."
"Bought single station pneumatic punching machine. Machine quality is ok, does the job. Punch holes are clean. We had a small issue with the solenoid valve after 3 months — they sent replacement under warranty but it took about 5 days to reach Raipur. Could be faster. Other than that, machine runs fine for our daily production of around 12-15 windows."
"Upgraded from a Chinese make punching machine to Mechnovate single station pneumatic. Big improvement in punch quality — holes are cleaner and the force is consistent. Old machine used to leave rough edges on thin profiles. This one doesnt. Only minor issue — the air consumption is slightly high so make sure you have a proper compressor. Overall very satisfied with the purchase."
"Single station pneumatic punching machine — bought it 4 months ago for our Thane unit. Good machine, foot pedal operation is comfortable. The punch force is uniform which gives clean holes without any profile distortion. We work mainly with Jindal profiles and the standard die set covers most requirements. Would have given 5 stars but the paint started chipping near the base after 2 months. Minor cosmetic issue but worth mentioning."
"We are in a small town Sangamner and bought the single station pneumatic punching. Machine is same quality as what you get in big cities — that was a pleasant surprise. No shortcut in manufacturing. Domal profile dies fit properly and hole quality is clean. Delivery from Ahmedabad was hassle free. For a small town fabricator like us, Mechnovate is a reliable option. Price is fair."
FAQ
Frequently Asked Questions
Common questions about the 1 Station Pneumatic Aluminium Punching Machine.
Pricing Info
1 Station Pneumatic Aluminium Punching Machine Price & Availability
Starting at ₹ 1,10,000 | August 2026
Place Your Order
Buy 1 Station Pneumatic Aluminium Punching Machine
Submit your order enquiry — our team calls you within 2 hours to confirm
Explore More
Related Punching Machines
2 Station Pneumatic Aluminium Punching Machine
Model: MEPPPST2
View Details →
Manual Punching Machine for Aluminium and UPVC
Model: MEMMPST1
View Details →
Single Head Cutting Machine for Aluminium and UPVC
Model: MEPCCSH1
View Details →
Pneumatic Copy Router Machine for Aluminium and UPVC
Model: MEPCR Series
View Details →About 1 Station Pneumatic Aluminium Punching Machine
The 1 Station Pneumatic Aluminium Punching Machine (Model: MEPPPST1) is designed for precision hole punching on aluminium window and door profiles. Featuring Mechnovate's "Easy Guiding System," this machine ensures profiles are accurately positioned every time, eliminating the misaligned holes that plague manual punching operations. The single-station configuration is ideal for workshops with standardized hole patterns or those that can efficiently batch their punching operations by die type.
The MEPPPST1 delivers 1.85 tons of pneumatic punching force through a single cylinder, producing clean holes in aluminium profiles up to 2.5mm wall thickness without burrs or profile distortion. The adjustable cutting depth meets specific requirements for different hardware types — from shallow drainage slots to deep lock mechanism cutouts. The machine operates on compressed air only at 6-8 bar, requiring no electrical connection for the punching mechanism itself. The compact 400mm x 400mm footprint fits into tight workshop layouts, and at 150 kg the machine is heavy enough for vibration-free operation without floor bolting. Die customization is available for specific profile systems including Domal, Jindal, and European extrusions.
Key Features — 1 Station Pneumatic Aluminium Punching Machine
Easy Guiding System
Precision profile positioning guides ensure the workpiece sits in the exact same position for every punch. This eliminates the measurement errors and misaligned holes common with manual positioning methods.
1.85 Ton Punching Force
The pneumatic cylinder delivers consistent 1.85-ton force on every stroke — enough to punch clean holes through 2.5mm aluminium without burrs or profile distortion.
Adjustable Cutting Depth
Fine-adjustment mechanism controls punch penetration depth for different operations — shallow for drainage slots, deep for lock mechanism cutouts.
Air-Only Operation
The machine runs entirely on compressed air at 6-8 bar. No electrical connection needed for the punching mechanism, simplifying installation and reducing operating costs.
How It Works — Working Principle
The operator places the aluminium profile onto the work table and slides it against the Easy Guiding System stops that position the profile at the correct distance from the punch die. The pneumatic clamp engages to hold the profile securely. The operator activates the punch cycle via foot pedal — the pneumatic cylinder drives the punch through the profile and retracts automatically. The entire punch cycle takes approximately 2 seconds. For repeating holes along a profile, the operator slides the profile to the next position against the adjustable length stop and repeats.
Ideal For
- ✓Startup aluminium fabrication workshops
- ✓Fabricators with standardized hole patterns
- ✓Workshops doing 5-20 windows per day
- ✓Workshops without 3-phase electrical supply
- ✓Mobile or site-based fabrication setups
Maintenance Tips — MEPPPST1
- ●Apply a thin film of punch lubricant to the die set before each shift to reduce punching force and extend die life.
- ●Inspect the punch and die clearance monthly. Excessive clearance produces holes with burrs; insufficient clearance causes die binding.
- ●Check the pneumatic cylinder seals every 1000 cycles for air leaks. A leaking cylinder reduces punching force gradually.
- ●Clean aluminium chips from the die cavity after every 50 punches to prevent chip buildup that can crack the die.
Why Choose Mechnovate 1 Station Pneumatic Aluminium Punching Machine?
- ✓Precision-engineered punching machine for aluminium and uPVC window profiles — handles all standard Indian profile systems including Domal, Jindalinium, and European systems.
- ✓Manufactured in Ahmedabad, Gujarat with rigorous quality standards. Every machine is tested before dispatch with actual aluminium and uPVC profiles to ensure cut quality and dimensional accuracy.
- ✓Factory-direct pricing with no distributor markup. GST invoice provided. Same price for buyers across India — whether in Delhi, Mumbai, Bangalore, Chennai, or any other city.
- ✓24/7 after-sales support via WhatsApp and phone. Spare parts stocked in Ahmedabad and dispatched same-day. On-site warranty repairs by Mechnovate technicians.
- ✓1-year comprehensive warranty covering parts and labour. On-site installation and operator training available on request.
Applications of 1 Station Pneumatic Aluminium Punching Machine
🏢 Window Hardware Holes
- ●Handle mounting holes
- ●Lock mechanism cutouts
- ●Hinge pocket punching
- ●Drainage slot punching
🏭 Profile Processing
- ●Aluminium profile punching
- ●uPVC profile notching
- ●Multi-point lock holes
- ●Espagnolette mounting holes
🔧 Industrial Applications
- ●Sheet metal punching
- ●Custom die-cut patterns
- ●Ventilation slot punching
- ●Cable tray perforations
🎯 Key Industries Served
- ●Window & door manufacturers
- ●Aluminium fabrication units
- ●Sheet metal workshops
- ●HVAC duct fabricators
Technical Specifications — MEPPPST1
| Parameter | Value |
|---|---|
| Model | MEPPPST1 |
| Die Type | Customizable |
| Clamping Type | Pneumatic |
| Guiding System | Easy Guiding System |
| Machine Weight | 150 kg |
| Power Required | Compressed Air Only |
| Profile Thickness | Up to 2.5 mm |
| Number of Stations | 1 |
| Operating Pressure | 6–8 bar |
| Cylinder Output Force | 1.85 ton |
| Machine Size (L × W × H) | 400 × 400 × 1200 mm |
Frequently Asked Questions — 1 Station Pneumatic Aluminium Punching Machine
What hole shapes can this machine punch?
The machine can punch any shape that fits a die — round holes, oval slots, rectangular cutouts, and custom shapes. Standard dies for common operations are included; custom dies are available within 5-7 days.
What is the difference between 1-station and 2-station models?
The 1-station model (MEPPPST1) holds one die set at a time. The 2-station model (MEPPPST2) holds two die sets simultaneously, allowing the operator to punch two different hole patterns without changing dies — faster for workshops with varied hole requirements.
What compressor size is needed?
A 2 HP compressor with 100-litre tank at 6-8 bar is sufficient. The machine uses a short burst of air per cycle and recovers quickly between punches.
Buying Guide — Punching Machine
When choosing a punching machine for your aluminium and uPVC window fabrication workshop, consider your daily production volume, the profile systems you work with, and the specific operations you need to perform. Mechnovate manufactures machines for workshops of all sizes — from small fabricators doing 5–10 windows per day to large production facilities processing 100+ windows daily.
Every 1 Station Pneumatic Aluminium Punching Machine shipped from our Ahmedabad factory includes a 1-year comprehensive warranty covering parts and labour. On-site installation by a trained Mechnovate technician and operator training are available on request. Spare parts and consumables are stocked in Ahmedabad and dispatched same-day to any location in India.
Need help choosing the right punching machine?
Call +91-9265699061 or email [email protected] for a custom quote based on your workshop requirements.