Aluminium Punching Machine Price in India: Manual, Single & Two Station
The aluminium punching machine price at Mechnovate starts from ₹20,000 + GST for the manual model, ₹40,000 + GST for the single station pneumatic model and ₹65,000 + GST for the two station pneumatic model. All three are made in our Ahmedabad factory and sold factory-direct with a GST invoice.
This guide explains what each punching machine does, what you get at each price, and how to pick the right one for your window and door workshop. You can see the full range on our aluminium punching machines page.
Aluminium Punching Machine Price in India: The Short Answer
| Model | Type | Capacity | Mechnovate price |
|---|---|---|---|
| MEMMPST1 | Manual | Profiles up to 1.5 mm | From ₹20,000 + GST |
| MEPPPST1 | Single station pneumatic | 1.85 ton, 6–8 bar, profiles up to 2.5 mm | From ₹40,000 + GST |
| MEPPPST2 | Two station pneumatic | Two punching stations | From ₹65,000 + GST |
Prices are ex-factory Ahmedabad and are the same anywhere in India. Only delivery and installation depend on your location.
What Does a Punching Machine Do?
In window fabrication, a punching machine cuts clean holes and slots in aluminium profiles using a die. Typical jobs include drainage slots, lock and handle holes, and notches for hardware. A punch gives a clean, repeatable cut in a few seconds, so every frame in a batch gets identical holes. Doing the same work by hand-drilling and filing is slow and the results vary from piece to piece.
Punching sits alongside cutting and routing in a normal workshop flow. Profiles are first cut to length on an aluminium cutting machine, then punched, and then lock pockets and handle slots are milled on a copy router.
Manual Punching Machine (MEMMPST1): From ₹20,000 + GST
The manual model is the entry point for small workshops and for fabricators who punch only occasionally.
- Handles profiles up to 1.5 mm wall thickness
- Hand-operated, so no compressor is needed
- The lowest running cost of the three models
- Suits low daily volumes and light sections
If you are starting a small workshop and your profiles are thin, this machine lets you begin with a very small investment. Its limit is speed and thickness: for heavier sections or larger batches, the pneumatic models are a better fit.
Single Station Pneumatic Punching Machine (MEPPPST1): From ₹40,000 + GST
The single station pneumatic machine is the most popular choice for workshops that punch every day.
- 1.85 ton punching force
- Runs on compressed air at 6–8 bar
- Handles profiles up to 2.5 mm
- Pneumatic operation means less operator effort and a faster cycle than a manual press
With one die station, you change the die when you move from one hole or slot type to another. For a workshop that works on a few profile systems and makes the same punches repeatedly, this is usually the best balance of price and productivity.
Two Station Pneumatic Punching Machine (MEPPPST2): From ₹65,000 + GST
The two station model carries two dies on the same machine, so you can switch between two punching operations without changing a die.
- Two punching stations on one machine
- Pneumatic operation, so a compressor is required
- Saves die-change time when you alternate between two jobs, such as a drainage slot and a lock hole
If your daily work involves two regular punch types, the extra ₹25,000 over the single station model can pay back quickly in time saved. Please ask us for the detailed specification of this model when you send your enquiry.
Manual vs Pneumatic Punching: Which Should You Buy?
| Factor | Manual (MEMMPST1) | Single station pneumatic (MEPPPST1) | Two station pneumatic (MEPPPST2) |
|---|---|---|---|
| Starting price | ₹20,000 + GST | ₹40,000 + GST | ₹65,000 + GST |
| Profile thickness | Up to 1.5 mm | Up to 2.5 mm | Ask for details |
| Compressor needed | No | Yes (6–8 bar) | Yes |
| Best for | Small or occasional work | Daily production | Daily production with two punch types |
For a detailed side-by-side, read our manual vs pneumatic punching machine comparison.
Custom Dies for Your Profile System
A punching machine is only as useful as its die. Mechnovate can customise dies for Domal, Jindal and European profiles, so the holes and slots match the sections you actually use. When you enquire, share the profile drawings or sample sections, along with the hole or slot sizes you need.
What Else Affects the Final Cost?
The starting price covers the standard machine. Your final quotation depends on:
- The model you choose (manual, single or two station)
- Custom dies for your profile system
- Compressed air: pneumatic models need 6–8 bar. If you already run a compressor, there is no extra cost; if not, include one in your budget
- Delivery and installation to your city. Delivery is same day within Ahmedabad and typically 1–5 days elsewhere in India. On-site installation and operator training are available on request
Factory-Direct Buying
Buying directly from the manufacturer means no dealer margin in the price, a GST invoice, and direct technical support from the people who build the machine. Every Mechnovate machine carries a 6-month warranty. To plan your full workshop, browse our window machinery range or follow the workshop setup guide.
Frequently Asked Questions
What is the price of an aluminium punching machine in India?
At Mechnovate, the manual model starts from ₹20,000 + GST, the single station pneumatic model from ₹40,000 + GST, and the two station pneumatic model from ₹65,000 + GST. All prices are ex-factory Ahmedabad.
Which punching machine should a small workshop buy?
If you punch thin profiles occasionally, the manual MEMMPST1 (profiles up to 1.5 mm) keeps your investment low and needs no compressor. If you punch daily or work with thicker sections up to 2.5 mm, the single station pneumatic MEPPPST1 is the better choice.
Do I need a compressor?
The pneumatic models (MEPPPST1 and MEPPPST2) run on compressed air at 6–8 bar. The manual model does not need a compressor.
Can the dies be made for my profile system?
Yes. Dies can be customised for Domal, Jindal and European profiles. Share your profile sections and the required hole or slot sizes with us.
Does the price include GST, and is it the same across India?
Prices are quoted as "+ GST", and you receive a GST invoice. The machine price is the same across India; delivery and installation are quoted based on your location.
Get Today's Price
Not sure which punching machine fits your workshop? Call +91-9265699061, message us on WhatsApp, or send an enquiry. Tell us your profile thickness and daily volume, and we will recommend a model and send a factory-direct quotation. You can also see all punching machines before you decide.
Get more articles like this
Follow Mechnovate on Google to see our guides in Google Discover & News
